How many Christmas lights do I need for my tree?

Short answer

About 100 lights per foot of tree for a classic look: 700 for a 7-foot tree, or seven 100-light strands. Use 50 per foot for a light touch or 150 for a full, bright tree.

Work it out for your numbers

Lights needed

700 lights

Strands to buy
7 100-light strands
Power draw
42 watts
Cost for the season
$1.36
Cost per day
$0.05

Lights by tree height

Tree heightLight touchClassicFull and bright
4 ft200400600
5 ft250500750
6 ft300600900
6.5 ft325650975
7 ft3507001,050
7.5 ft3757501,125
8 ft4008001,200
9 ft4509001,350

Wide, full trees take more than slim ones of the same height. If yours is a slim or pencil tree, the light-touch column is often enough.

What they cost to run

Very little with LEDs. 700 LED mini lights on for 6 hours a day for 30 days cost about $1.36 for the season at 18 cents per kWh. The same number of old incandescent mini lights cost about $9.07.

Tips

  • Check the box for how many strands you can safely connect end to end. LED sets usually allow far more than incandescent ones.
  • Wrapping the tree in vertical sections, base to tip, puts lights deep in the branches and makes them easier to take down than one long spiral.
  • Buy one extra strand. Some will be dead next year, and matching an older set later is hard.
  • Use outdoor-rated lights and cords outside, and a timer so they’re not on all night.

LED or incandescent?

LED strands use far less power, stay cool to the touch and last many seasons. More LED strands can usually be connected end to end, which helps on big trees. Incandescent lights have a warmer glow that some people prefer, but they use much more electricity and the bulbs burn out more often. If you like the warm look, choose LEDs labeled “warm white”.

How to wrap a tree

Plug in and test every strand before it goes on the tree. Start at the bottom near the outlet, so the plug end is where you need it.

For the fullest look, wrap each large branch individually: run the lights from the trunk out to the tip and back again, then move up to the next branch. It takes longer but lights the tree from inside. For a quicker job, weave the strand around the tree in a loose zigzag, pushing it back toward the trunk every so often so the lights aren’t all on the surface.

Outdoor lights

Outside, measure rather than count. Measure each roofline, railing and window you want to light, add a little for going around corners and reaching the outlet, and buy strands by their lit length. For bushes, a net light the size of the bush is the fastest way to cover it evenly.

Use lights and extension cords rated for outdoor use, plug them into a GFCI outlet, and keep connections off wet ground.

Safety

  • Use lights certified by a testing lab such as UL or ETL, and check last year’s strands for cracked sockets and frayed wires before putting them up.
  • Keep a real tree well watered. A dry tree catches fire easily.
  • Turn the lights off when you go to bed or leave the house, or put them on a timer.

Common questions

How many lights for a 7 foot tree?

About 700 for a classic look, or seven 100-light strands. 350 for a light touch, 1,050 for a full, bright tree.

How many lights for a 6 foot tree?

About 600 for a classic look.

How much does it cost to run Christmas lights?

About $1.36 for a season of 700 LED lights, 6 hours a day for 30 days at 18 cents per kWh.

Updated November 16, 2026. Figures are estimates for planning. Check product labels and local codes before you buy or build.