How much paint do I need for a room?

Short answer

A 12 × 12 ft room with 8-foot walls, one door and two windows has about 334 square feet of wall. Two coats at 350 square feet per gallon take just under 2 gallons. Painting the ceiling too adds about another gallon.

Work it out for your numbers

Check the can. Most interior paints list 350–400 sq ft.

Paint needed

1.91 gallons

Cans to buy
2 1-gallon cans
Paintable area
334 sq ft per coat

Paint by room size

Room (8 ft walls)Wall areaWalls, 2 coatsWith ceiling
5 × 8 ft bathroom, 1 door188 sq ft1.1 gal1.3 gal
10 × 10 ft, 1 door, 1 window285 sq ft1.6 gal2.2 gal
12 × 12 ft, 1 door, 2 windows334 sq ft1.9 gal2.7 gal
12 × 14 ft, 1 door, 2 windows366 sq ft2.1 gal3.1 gal
15 × 20 ft, 2 doors, 3 windows475 sq ft2.7 gal4.4 gal

At 350 square feet per gallon. Round up to whole gallons when you buy, and keep the leftover for touch-ups.

The math

Add up the walls (2 × length + 2 × width, times the height), subtract about 20 square feet per door and 15 per window, multiply by the number of coats and divide by the coverage on the can.

When you’ll need more

  • Fresh drywall, bare wood and rough texture soak up paint. Prime first, or expect less coverage than the can says.
  • Big color changes, especially light over dark, often need a third coat or a tinted primer.
  • Trim and doors usually take a separate quart or two of semi-gloss.

Buy it all at once

Tinted paint can vary slightly from batch to batch. Buying everything together, or mixing the cans in a bucket before you start, keeps the color even across walls.

Choosing a finish

Sheen changes how much a wall shows flaws and how well it cleans. Flat hides bumps and patches best and is the usual choice for ceilings. Eggshell and satin have a soft sheen and wipe clean, which makes them the most common wall finishes. Semi-gloss is tough and easy to clean, so it’s used on trim, doors, kitchens and bathrooms, but it shows every imperfection.

When you need primer

  • New drywall or fresh joint compound, which soak up paint unevenly
  • Patched areas, which can show through as dull spots
  • A big color change, especially light over dark
  • Stains from water, smoke or marker, which need a stain-blocking primer
  • Glossy surfaces, which need a bonding primer or a light sanding

“Paint and primer in one” products can cover many repaints in two coats, but they don’t replace a dedicated primer in the situations above.

Trim and ceilings

Trim and doors take much less paint than walls. A quart is often enough for the baseboards, door casings and one or two doors in an average room; more doors or tall baseboards may need a gallon. Ceilings are measured as length × width, and ceiling paint is often thicker so it spatters less.

Prep makes the paint go further

Wash greasy or dusty walls, fill nail holes and cracks, sand the patches smooth and remove outlet covers. A clean, sound wall takes paint evenly, so the coats cover the way the can says they will.

Common questions

How much paint for a 12x12 room?

Just under 2 gallons for two coats on the walls, or about 2.7 gallons with the ceiling.

How many square feet does a gallon of paint cover?

Most interior paints list 350 to 400 square feet per coat on smooth, primed walls.

Do I need two coats of paint?

Usually, yes. Two coats give even color and better durability, especially over a different color.

Updated November 16, 2026. Figures are estimates for planning. Check product labels and local codes before you buy or build.