How much gravel do I need for a driveway?

Short answer

A ton of gravel covers about 77 square feet at 3 inches deep, or about 58 at 4 inches. A typical 12 × 50 ft driveway at 4 inches takes about 11.4 tons (8.1 cubic yards), including 10% extra for compaction.

Work it out for your numbers

1.4 tons is typical for gravel. Ask your supplier for their number.

Gravel needed

1.71 tons

Volume
1.22 cubic yards
Volume
33 cubic feet
Weight
3,422 lb

Gravel by driveway size, 4 inches deep

DrivewayTonsCubic yards
10 × 20 ft (one car)3.82.7
20 × 20 ft (two-car pad)7.65.4
12 × 50 ft11.48.1
10 × 100 ft1913.6
12 × 100 ft22.816.3

At 1.4 tons per cubic yard, with 10% added for compaction and spillage.

How far a ton goes

DepthSquare feet per tonSquare feet per cubic yard
2 inches116162
3 inches77108
4 inches5881
6 inches3954

How deep?

  • Topping up an existing gravel driveway usually takes 2 to 3 inches of new stone.
  • A new driveway is built in layers: larger crushed base stone, compacted, then a few inches of smaller top stone. Ask your supplier what they recommend for your soil and traffic, and run the calculator once per layer.
  • Crushed, angular stone locks together and stays put. Round pea gravel rolls under tires and spreads.

The math

Length × width × depth in feet (inches ÷ 12) gives cubic feet. Divide by 27 for cubic yards, then multiply by the weight of a yard of gravel, usually 1.4 tons but anywhere from about 1.2 to 1.6 depending on the stone. Add about 10% for compaction.

Common questions

How many tons of gravel do I need for a 100 ft driveway?

For a 12 ft wide driveway at 4 inches deep, about 23 tons (16 cubic yards), including 10% extra. At 10 ft wide, about 19 tons.

How much area does a ton of gravel cover?

About 116 square feet at 2 inches, 77 at 3 inches and 58 at 4 inches, at 1.4 tons per cubic yard.

How much does a cubic yard of gravel weigh?

Usually about 1.4 tons (2,800 lb), and anywhere from 1.2 to 1.6 tons depending on the stone and how wet it is.

Updated November 16, 2026. Figures are estimates for planning. Check product labels and local codes before you buy or build.