Gravel calculator

Gravel yards sell by the ton or the cubic yard. Enter the area and depth to get both.

Measuring in meters? Use the metric version

1.4 tons is typical for gravel. Ask your supplier for their number.

Gravel needed

1.71 tons

Volume
1.22 cubic yards
Volume
33 cubic feet
Weight
3,422 lb

Shop for this project

As an Amazon Associate, Measure the Dream earns from qualifying purchases.

How it works

The calculator finds the volume (length × width × depth in feet), adds your extra percentage, and converts cubic feet to cubic yards by dividing by 27. Weight is cubic yards × the weight per cubic yard you enter.

That weight is the number that varies most. Stone type, size and moisture all change it, so suppliers quote anywhere from about 1.2 to 1.6 tons per yard. If your supplier gives you a figure, put it in.

Example

With length 30 ft, width 4 ft, depth 3 in, weight per cubic yard 1.4 tons, extra for compaction and spillage 10%, the answer is 1.71 tons.

How to measure

Measure the length and width of the area, and decide on depth before you order. A garden path usually takes 2 to 3 inches, a patio base about 4, and a gravel driveway is typically built in layers: a thicker base of larger crushed stone with a few inches of smaller stone on top.

Suppliers sell gravel by the ton, but you measure by volume, so the calculator converts using the weight per cubic yard. Crushed stone and pea gravel are usually around 1.3 to 1.5 tons per cubic yard. Ask your supplier for the figure for the stone you’re buying and enter it.

Tons of gravel by area and depth

At 1.4 tons per cubic yard with 10% extra.

Area2 in deep3 in deep4 in deep6 in deep
Path, 30 × 3 ft0.861.281.712.57
Path, 50 × 4 ft1.92.853.85.7
Patio, 12 × 12 ft1.372.052.744.11
Patio, 20 × 20 ft3.85.77.611.41
Driveway, 10 × 50 ft4.757.139.5114.26
Driveway, 12 × 80 ft9.1313.6918.2527.38

Common mistakes

  • Mixing up tons and cubic yards. A ton of gravel is a bit less than a cubic yard, so ordering “3 tons” when you worked out 3 yards leaves you short.
  • Using pea gravel on a driveway. Round stones roll underfoot and under tires. Angular crushed stone locks together and stays put.
  • Skipping the base. Gravel laid straight on soil sinks into it over time. Landscape fabric or a compacted base layer keeps the top layer clean.
  • Forgetting that gravel compacts. Running a plate compactor or roller over it shrinks the depth, which is why the calculator adds 10% by default.

Tips before you buy

  • Gravel compacts. Adding 10% covers settling and what gets left in the truck bed.
  • Paths and patios usually take 2–3 inches of decorative gravel on top of a compacted base. Driveways need a deeper base layer.
  • Lay landscape fabric first if you want fewer weeds coming up through the stone.
  • Round your order up to what the supplier will deliver. Many have a minimum, and a second delivery costs more than a little extra stone.

Common questions

How much does a cubic yard of gravel weigh?

Typical gravel weighs about 1.4 tons (2,800 lb) per cubic yard. Crushed stone can run heavier and wet stone weighs more than dry.

How many square feet does a ton of gravel cover?

At 1.4 tons per yard, a ton of gravel is about 19 cubic feet. That covers roughly 115 square feet at 2 inches deep or 77 square feet at 3 inches.

Should I order by the ton or the cubic yard?

Order the way your supplier prices it. This calculator gives both so you can match their quote.

Add this calculator to your website

Free for any site or blog. Paste this code where you want the calculator to appear. The short script makes it resize to fit; if your site doesn’t allow scripts, the calculator still works without it.