Paver calculator

Enter the patio size and paver size. You’ll get the paver count plus the gravel base and sand bedding underneath.

Measuring in meters? Use the metric version

Pavers needed

681 pavers

Base gravel
1.78 cubic yards (about 2.5 tons)
Bedding sand
0.44 cubic yards
Patio area
144 sq ft
Pavers per sq ft
4.5

Shop for this project

GRABO: code GRABO15 takes 15% off at order.grabo.com.

As an Amazon Associate, Measure the Dream earns from qualifying purchases. Other links on this list may also earn us a commission, at no extra cost to you.

How it works

Paver count is the patio area divided by the area of one paver, plus your allowance for cuts. Base gravel and bedding sand are area × depth, converted to cubic yards. Tonnage assumes 1.4 tons per cubic yard, a typical figure for crushed base.

The calculator uses each paver’s face size. The narrow joints between pavers are filled with sand, so they don’t meaningfully change the count.

Example

With patio length 12 ft, patio width 12 ft, paver width 4 in, paver length 8 in, extra for cuts 5%, gravel base depth 4 in, sand bedding depth 1 in, the answer is 681 pavers.

How to measure

Measure the patio or walkway’s length and width, and if it has curves, measure it as the rectangle it fits inside. The extra pavers become the cuts along the curve.

Plan the depth of what goes underneath at the same time. A patio usually needs about 4 to 6 inches of compacted gravel base and an inch of bedding sand. Areas that carry cars need a thicker base.

Pavers and base material by patio size

4 × 8 inch pavers with 5% extra, 4 inches of base and 1 inch of sand.

Patio sizePaversBase gravel (cu yd)Bedding sand (cu yd)
10 × 10 ft4731.230.31
12 × 12 ft6811.780.44
12 × 16 ft9082.370.59
16 × 20 ft1,5123.950.99
20 × 20 ft1,8904.941.23

Common mistakes

  • Not compacting the base in layers. Compact the gravel every 2 inches or so. A thick layer compacted all at once settles unevenly later.
  • Building it flat. Slope the patio away from the house, commonly ⅛ to ¼ inch per foot, so water runs off.
  • Leaving out edge restraint. Without plastic or concrete edging, the outer pavers drift and the pattern opens up.
  • Using bedding sand in the joints. Joint sand, usually polymeric, is a separate product swept in after the pavers are laid.

Tips before you buy

  • Patios and walkways usually get 4–6 inches of compacted gravel base. Driveways need considerably more.
  • Compact the base in 2-inch lifts with a plate compactor. A soft base is the main reason pavers sink.
  • Use 5% extra for a straight running pattern and 10–15% for herringbone, diagonal layouts or lots of curves.
  • Slope the patio away from the house, about 1/4 inch per foot, so water drains off.

Common questions

How many 4×8 pavers are in a square foot?

4.5. Each 4 × 8 inch paver covers 32 square inches, and a square foot is 144 square inches.

How deep should the paver base be?

4–6 inches of compacted gravel is common for patios and walkways, topped with about 1 inch of bedding sand. Clay soils and driveways need more.

How much extra should I buy?

Plan on 5–10%. Keep a few spares after the job for future repairs, since colors change between production runs.

Add this calculator to your website

Free for any site or blog. Paste this code where you want the calculator to appear. The short script makes it resize to fit; if your site doesn’t allow scripts, the calculator still works without it.