Concrete slab calculator
Enter the slab size and thickness. You’ll get cubic yards for a ready-mix order and bag counts if you’re mixing it yourself.
Measuring in meters? Use the metric version
Concrete needed
1.36 cubic yards
- 80 lb bags
- 62 bags
- 60 lb bags
- 82 bags
- 40 lb bags
- 123 bags
- Volume
- 36.7 cubic feet
Shop for this project
As an Amazon Associate, Measure the Dream earns from qualifying purchases.
Quick answers and tables: How many bags of concrete do I need?
How it works
Volume is length × width × thickness, with thickness converted from inches to feet. The calculator adds your extra percentage, then divides by 27 to get cubic yards, which is how ready-mix concrete is ordered.
Bag counts use the yield printed on standard premix bags: an 80 lb bag makes about 0.6 cubic feet, a 60 lb bag 0.45, and a 40 lb bag 0.3.
Example
With slab length 10 ft, slab width 10 ft, thickness 4 in, extra for spillage and uneven ground 10%, the answer is 1.36 cubic yards.
How to measure
Measure the inside of your forms, not the area you dug out. If the slab is an L shape or has a cut corner, split it into rectangles, run each one through the calculator and add them up.
Then check the thickness in several places once the base is graded. Low spots in the subgrade fill with concrete too, and a hollow that’s an inch deep across a quarter of the slab adds noticeably to the order. A string line pulled tight across the forms makes it easy to measure down to the base at each point.
Concrete for common slab sizes
At 4 inches thick with 10% extra. Bag counts are rounded up to whole bags.
| Slab size | Cubic yards | 80 lb bags | 60 lb bags |
|---|---|---|---|
| 4 × 4 ft pad | 0.22 | 10 | 14 |
| 8 × 8 ft | 0.87 | 40 | 53 |
| 10 × 10 ft | 1.36 | 62 | 82 |
| 10 × 12 ft | 1.63 | 74 | 98 |
| 12 × 12 ft | 1.96 | 88 | 118 |
| 12 × 16 ft | 2.61 | 118 | 157 |
| 20 × 20 ft | 5.43 | 245 | 326 |
| 24 × 24 ft | 7.82 | 352 | 470 |
Common mistakes
- Assuming 2×4 forms make a 4 inch slab. A 2×4 is actually 3½ inches wide, so the slab comes out thinner unless the forms sit a little below grade or you use 2×6s.
- Ordering ready-mix to the exact volume. Trucks don’t come back for half a yard cheaply, so most people round up and keep a spot ready for any leftover.
- Skipping the gravel base. Four inches of compacted gravel under the slab drains water and keeps the concrete from cracking as the soil moves.
- Mixing bags too slowly on a hot day. If the first batches set before the last ones go in, you get a weak cold joint. Line up help, or order ready-mix past about a yard.
Tips before you buy
- 4 inches is standard for patios, sidewalks and shed floors. Driveways that carry heavier vehicles are commonly poured 5–6 inches thick.
- Ground is rarely perfectly flat. 5–10% extra keeps you from running short with half a slab poured.
- Mixing more than about a cubic yard by hand is a long, hard day. Compare the cost of ready-mix delivery, and ask about short-load fees.
- Check your local building department before pouring. Some slabs need a permit, rebar or a minimum thickness.
Common questions
How many 80 lb bags of concrete are in a yard?
45. A cubic yard is 27 cubic feet and each 80 lb bag yields about 0.6 cubic feet. It takes 60 bags at 60 lb.
How much area does an 80 lb bag of concrete cover?
About 1.8 square feet at 4 inches thick, or 2.4 square feet at 3 inches.
How thick should a concrete patio be?
Four inches is the usual thickness for a patio on well-compacted ground. Go thicker if it will hold a hot tub or other heavy load.