Fence post concrete calculator

Enter your hole size and post size. The calculator subtracts the post itself, so you don’t overbuy.

Measuring in meters? Use the metric version

About three times the post width is a common rule.

Fast-setting mix

25 50 lb bags

Standard mix instead
16 80 lb bags
Per post
2.46 50 lb fast-setting bags
Total concrete
9.21 cubic feet

Shop for this project

As an Amazon Associate, Measure the Dream earns from qualifying purchases.

How it works

Each hole is a cylinder: π × radius² × depth. The calculator subtracts the space the post takes up and any gravel you put in the bottom, then converts cubic inches to cubic feet (1,728 cubic inches per cubic foot) and multiplies by the number of posts.

A 50 lb bag of fast-setting post mix yields about 0.375 cubic feet. A standard 80 lb bag of concrete mix yields about 0.6.

Example

With number of posts 10, hole diameter 10 in, hole depth 24 in, gravel in the bottom of the hole 0 in, post size: 4×4 (3½ × 3½ in), the answer is 25 50 lb bags.

How to measure

Plan the hole size from the post. A common rule is a hole about three times the post’s width: roughly 10 to 12 inches across for a 4×4 and 14 to 16 for a 6×6. Depth is often a third to a half of the post’s height above ground, and below the frost line in cold climates.

Call 811 a few days before you dig so buried utility lines are marked. It’s free, and in most states it’s required.

Bags per post

For one post, no gravel in the bottom of the hole. Bags are rounded up.

Hole size4×4, 50 lb fast-setting4×4, 80 lb standard6×6, 50 lb fast-setting
8 in wide × 24 in deep211
10 × 24 in322
10 × 30 in423
12 × 36 in645
14 × 42 in1069

Common mistakes

  • Digging a hole that’s too narrow. A thin collar of concrete cracks and lets the post move.
  • Skipping drainage. A few inches of gravel in the bottom lets water drain away from the end grain.
  • Leaving the concrete flat or below ground. Slope the top away from the post so rain runs off instead of pooling around the wood.
  • Hanging gates the same day. Fast-setting mix hardens in under an hour, but give it at least a few hours before putting weight on the post, and longer for gates.

Tips before you buy

  • A common rule is to bury about a third of the post’s total length. In cold climates, footings also need to go below the frost line, so check your local code.
  • A few inches of gravel in the bottom of the hole helps water drain away from the end of the post.
  • Slope the top of the concrete away from the post so rainwater doesn’t pool against the wood.
  • Buy one or two extra bags. Holes dug by hand always come out a little wider than planned.

Common questions

How many bags of concrete per fence post?

For a 4×4 post in a 10-inch hole 24 inches deep, about 2½ bags of 50 lb fast-setting mix, or 1½ bags of 80 lb standard mix.

How big should a fence post hole be?

Roughly three times the post’s width: about 10–12 inches for a 4×4 and 16–18 inches for a 6×6.

Fast-setting or regular concrete for posts?

Fast-setting mix is poured dry and soaked in place, and posts can usually take weight in a few hours. Regular mix is cheaper per cubic foot but you have to mix it first and wait longer.

Add this calculator to your website

Free for any site or blog. Paste this code where you want the calculator to appear. The short script makes it resize to fit; if your site doesn’t allow scripts, the calculator still works without it.