Gravel calculator

Gravel is sold by the tonne, by the bulk bag or by the cubic metre. Enter the area and depth to get all three.

Measuring in feet and inches? Use the US version

About 1.6–1.8 tonnes for most gravel. Ask your supplier.

Gravel needed

0.94 tonnes

Volume
0.55 m³
Bulk bags
1 1 tonne bags
Area
10 m²

How it works

The calculator works out the volume (length × width × depth, all in metres), adds your extra percentage, then multiplies by the weight of a cubic metre of gravel. That weight varies with the stone’s type, size and moisture, so use your supplier’s figure if they give one.

Bulk bags are sold by weight, typically about a tonne, which is roughly 0.6 m³ of gravel.

Example

With length 10 m, width 1 m, depth 50 mm, weight per cubic metre 1.7 tonnes, extra for settling and spillage 10%, the answer is 0.94 tonnes.

How to measure

Measure the length and width in metres and decide on the depth: about 50 mm for a decorative path or border, and more for a driveway, usually laid over a compacted sub-base.

Gravel is sold by weight, so the calculator converts volume to tonnes using a typical density of about 1.7 tonnes per cubic metre. Ask your supplier for the figure for the stone you’re buying.

Tonnes of gravel by area and depth

At 1.7 tonnes per cubic metre with 10% extra.

Area50 mm deep75 mm deep100 mm deep
Path, 10 × 1 m0.941.41.87
Border, 5 × 2 m0.941.41.87
Patio, 4 × 4 m1.52.242.99
Driveway, 3 × 10 m2.814.215.61
Driveway, 5 × 12 m5.618.4211.22

Common mistakes

  • Assuming a bulk bag is a cubic metre. Bulk bags are usually sold by weight, around a tonne, and the volume that gives depends on the stone.
  • Going too deep on a path. More than about 50 mm of loose gravel is hard to walk on and pushes around underfoot.
  • Skipping the membrane. A weed membrane under decorative gravel keeps weeds down and stops the stones sinking into the soil.
  • Using round pebbles on a driveway. Angular stone locks together; rounded pea shingle moves under tyres.

Tips before you buy

  • Decorative gravel paths usually need 30–50 mm over a weed membrane. Driveways need a deeper, compacted sub-base underneath.
  • Lay a permeable weed membrane first so weeds don’t grow up through the stones.
  • Smaller, angular gravel stays put better on paths. Rounded pea shingle moves underfoot.

Common questions

How much area does a tonne of gravel cover?

At about 1.7 tonnes per m³, a tonne covers roughly 12 m² at 50 mm deep or 20 m² at 30 mm.

How much does a cubic metre of gravel weigh?

Usually 1.6 to 1.8 tonnes, depending on the stone and how wet it is.

How deep should a gravel path be?

30–50 mm of decorative gravel is typical, over a membrane and a firm base.

Add this calculator to your website

Free for any site or blog. Paste this code where you want the calculator to appear. The short script makes it resize to fit; if your site doesn’t allow scripts, the calculator still works without it.