Tile calculator

Enter the area, the tile size and your grout joint. The joint width matters more than you’d think with small tiles.

Measuring in meters? Use the metric version

1/8 in = 0.125, 1/16 in = 0.0625, 3/16 in = 0.1875

Tiles needed

44 tiles

Boxes
5 boxes
Area
40 sq ft

Shop for this project

GRABO: code GRABO15 takes 15% off at order.grabo.com.

As an Amazon Associate, Measure the Dream earns from qualifying purchases. Other links on this list may also earn us a commission, at no extra cost to you.

How it works

Each tile effectively covers its own size plus one grout joint in each direction. The calculator divides the area (in square inches) by that footprint, adds your waste allowance, and rounds up.

Example

With area length 8 ft, area width 5 ft, tile width 12 in, tile length 12 in, grout joint 0.125 in, waste 10%, tiles per box 10, the answer is 44 tiles.

How to measure

Measure the floor or wall area in feet. For a backsplash, measure the length of the counter and the height up to the cabinets, then subtract the areas behind the range and any windows.

The calculator counts each tile plus its grout joint, so small tiles with wide joints need fewer tiles than you might expect. Check how many tiles are in a box, since that varies by tile size and brand.

Tiles needed by area and tile size

With ⅛ inch grout joints and 10% extra for cuts and breakage.

Area12 × 12 in12 × 24 in6 × 24 in
Small bath, 5 × 8 ft442243
Bathroom, 8 × 10 ft874486
Laundry room, 8 × 12 ft10452103
Kitchen, 12 × 15 ft19498193

Common mistakes

  • Using 10% extra for every layout. Diagonal and herringbone patterns, and large tiles with many cuts, often need 15 to 20%.
  • Mixing boxes from different lots. Color and size can vary slightly between production runs. Buy all the tile at once and check the lot numbers.
  • Laying large tiles on an uneven floor. Tiles over about 15 inches need a flatter floor, or the edges sit at different heights.
  • Throwing away the spares. Keep a few tiles for repairs; matching an old tile later is often impossible.

Tips before you buy

  • Use 10% waste for a straight grid and 15% or more for diagonal layouts, large-format tile or rooms with lots of cuts.
  • Keep a few spare tiles after the job. Matching a discontinued tile later is often impossible.
  • Lay out a dry row before setting tile so you don’t end up with a thin sliver at one wall.

Common questions

How many 12×12 tiles do I need for 100 square feet?

About 98 tiles before waste with a 1/8 inch joint, or 108 with 10% extra.

How much extra tile should I buy?

10% for a simple floor. 15–20% for diagonal patterns, herringbone or large tiles that break more often.

Does grout joint size change how many tiles I need?

Slightly. Wider joints mean fewer tiles, and the effect is bigger with small tiles like mosaics.

Add this calculator to your website

Free for any site or blog. Paste this code where you want the calculator to appear. The short script makes it resize to fit; if your site doesn’t allow scripts, the calculator still works without it.