Roof pitch calculator
Measure the rise over a known horizontal run, like 12 inches. You’ll get the pitch, angle and rafter length.
Roof pitch
6/12
- Angle
- 26.57 degrees
- Slope
- 50 %
- Pitch multiplier
- 1.118 × horizontal run
- Rafter length
- 13 ft 5 in before overhang
Shop for this project
As an Amazon Associate, Measure the Dream earns from qualifying purchases.
How it works
Pitch is how many inches a roof rises for every 12 inches of horizontal run. The calculator scales your rise and run to a run of 12. The angle is the arctangent of rise ÷ run, and the pitch multiplier, √(1 + (rise ÷ run)²), turns any horizontal distance into the sloped distance along the roof.
Example
With rise 6 in, run 12 in, the answer is 6/12 .
How to measure
From inside the attic, hold a level against the underside of a rafter, mark 12 inches along the level, and measure straight up from that mark to the rafter. That measurement is the rise, so 6 inches means a 6/12 pitch.
From the ground, you can also measure along a gable end with a pitch gauge or a smartphone level app held against the roof edge.
Common roof pitches
The multiplier converts a flat footprint to the sloped roof area.
| Pitch | Angle (degrees) | Slope (%) | Area multiplier |
|---|---|---|---|
| 3/12 | 14.04 | 25 | 1.031 |
| 4/12 | 18.43 | 33.3 | 1.054 |
| 5/12 | 22.62 | 41.7 | 1.083 |
| 6/12 | 26.57 | 50 | 1.118 |
| 8/12 | 33.69 | 66.7 | 1.202 |
| 10/12 | 39.81 | 83.3 | 1.302 |
| 12/12 | 45 | 100 | 1.414 |
Common mistakes
- Measuring off a level that isn’t level. Check the bubble before you read the rise.
- Using shingles on too low a slope. Asphalt shingles generally need at least 2/12, with extra underlayment below 4/12. Check the manufacturer’s requirements.
- Walking a steep roof. Steeper roofs need roof jacks or a harness; many people consider anything over about 6/12 too steep to walk safely.
- Forgetting overhangs. Rafter length and roof area grow with the eave and rake overhang.
Tips before you buy
- To measure from the attic, hold a level horizontally against a rafter, mark 12 inches along the level, and measure straight up to the rafter.
- Most asphalt shingles need a pitch of at least 2/12 with extra underlayment, and 4/12 or more for standard installation. Check the shingle wrapper.
- Add the overhang to the rafter length, and measure along the slope for the overhang too.
Common questions
What angle is a 6/12 roof pitch?
26.57 degrees.
What angle is a 4/12 pitch?
18.43 degrees. A 12/12 pitch is 45 degrees.
What is a common roof pitch?
Between 4/12 and 9/12 is common for houses. Lower pitches drain more slowly and limit roofing choices.