Wall stud calculator

Enter the wall length and stud spacing, plus corners and openings, which each need extra studs.

Studs

10 studs

Common studs
10 at 16 in on center
Plates
36 linear ft (1 bottom, 2 top)
Plate boards
3 12 ft boards

Shop for this project

As an Amazon Associate, Measure the Dream earns from qualifying purchases.

How it works

Common studs are the wall length divided by the spacing, plus one to close the end. Each corner or wall intersection gets two extra studs for backing. Each door or window gets two extra for the king and jack studs beside the opening. Plates are a single bottom plate and a doubled top plate, so three times the wall length.

Example

With wall length 12 ft, stud spacing: 16 in on center, corners and wall intersections 0, doors and windows 0, plate stock length: 12 ft, the answer is 10 studs.

How to measure

Measure the length of the wall and choose the stud spacing: 16 inches on center is standard for most walls, and 24 inches is allowed for some non-load-bearing walls. The calculator counts one stud per spacing plus one at the end.

Count corners and openings separately. Each corner and each door or window adds extra studs for framing.

Studs by wall length

Common studs only, before corners and openings.

Wall length16 in on center24 in on center
8 ft75
10 ft86
12 ft107
16 ft139
20 ft1611
24 ft1913

Common mistakes

  • Forgetting the extras around openings. Doors and windows need king and jack studs and a header, which the common-stud count doesn’t include.
  • Ignoring the crown. Sight down each stud and face the curve the same way so the wall stays flat.
  • Mixing spacing with the sheathing. Keep the layout on 16 or 24 inch marks so drywall and sheathing edges land on studs.
  • Buying exactly the count. Some studs are too twisted or bowed to use; buy a few extra.

Tips before you buy

  • Headers over doors and windows, and the short cripple studs above and below openings, aren’t included. Size headers from your plans or local code.
  • Buy a few extra studs. Some will be too bowed or twisted to use.
  • Exterior walls are often 2×6 for more insulation. Check what your plans or local energy code call for.

Common questions

How many studs for a 12 ft wall?

10 studs at 16 inches on center, before extras for corners and openings.

How many studs per foot of wall?

Roughly one per foot is a common quick estimate at 16 inches on center, once corners, openings and spares are included.

What does 16 inches on center mean?

The distance from the center of one stud to the center of the next is 16 inches.

Add this calculator to your website

Free for any site or blog. Paste this code where you want the calculator to appear. The short script makes it resize to fit; if your site doesn’t allow scripts, the calculator still works without it.