Siding calculator

Add up the length of the walls you’re siding, enter the wall height and the gable ends, and subtract windows and doors.

For a 40 × 30 house, all four sides add up to 140 ft.

Siding needed

14.85 squares

Square feet with waste
1,485 sq ft
Wall area
1,350 sq ft before waste

Shop for this project

As an Amazon Associate, Measure the Dream earns from qualifying purchases.

How it works

Rectangular wall area is total wall length × height. Each gable end is a triangle, width × height ÷ 2. The calculator subtracts window and door openings, adds waste, and divides by 100, because siding is sold by the square (100 square feet).

Example

With total wall length 140 ft, wall height 9 ft, gable ends 2, gable width 30 ft, gable height (wall top to peak) 8 ft, windows and doors 150 sq ft, waste 10%, the answer is 14.85 squares.

How to measure

Measure the perimeter of the house and the wall height from the foundation to the eaves. For each gable, measure the base width and the height to the peak; a triangle is half of base × height.

Add up the area of doors, windows and garage doors and subtract it. Siding is sold by the “square,” which is 100 square feet.

Squares of siding by house size

Two 30 × 8 ft gables, 150 sq ft of openings and 10% extra.

HouseSquaresSq ft with extra
24 × 30 ft, one story (9 ft walls)11.151,115
30 × 40 ft, one story14.851,485
30 × 50 ft, one story16.831,683
30 × 40 ft, two story (18 ft walls)28.712,871
40 × 50 ft, two story37.513,751

Common mistakes

  • Forgetting trim and accessories. J-channel, corner posts, starter strip, soffit and fascia are separate purchases.
  • Nailing vinyl tight. Vinyl expands and contracts, so nail in the center of the slots and leave it free to move.
  • Not subtracting openings. Large windows and garage doors can take several squares off the order.
  • Skipping the weather barrier. Check the housewrap and flashing around windows before new siding covers them.

Tips before you buy

  • A standard door is about 21 sq ft and an average window about 15 sq ft. Add them up for the openings figure.
  • Order trim, J-channel, corners and starter strip separately. They’re measured in linear feet.
  • Use 10% waste for simple houses and 15% for lots of corners, dormers and gables.

Common questions

What is a square of siding?

100 square feet of wall coverage.

How much siding for a 40×30 house?

With 9 ft walls, two 30 ft gables 8 ft tall and 150 sq ft of openings, about 14.85 squares including 10% waste.

Should I subtract windows when measuring for siding?

Yes for large openings. Some installers skip small windows to build in extra material.

Add this calculator to your website

Free for any site or blog. Paste this code where you want the calculator to appear. The short script makes it resize to fit; if your site doesn’t allow scripts, the calculator still works without it.