Extension cord gauge calculator

A cord that’s too thin for its length overheats and starves tools of power. Enter what you’re plugging in and how long a cord you need.

On the label. If it shows amps, multiply by 120: 10 amps = 1,200 watts.

Use a cord of at least

14 gauge (AWG)

Current draw
10 amps
Voltage drop with this cord
4.2 %
With 16 gauge instead
6.7% drop

Shop for this project

As an Amazon Associate, Measure the Dream earns from qualifying purchases.

How it works

Two things decide the gauge. First, the cord has to carry the current safely. Typical ratings are 10 amps for 18 gauge, 13 for 16 gauge, 15 for 14 gauge and 20 for 12 gauge. Second, long thin wires lose voltage, which makes motors run hot and lights dim. The calculator works out the voltage drop from the copper wire’s resistance over the cord’s length there and back, and picks the thinnest cord that keeps it under 5%.

Lower gauge numbers are thicker wire: 12 gauge is heavier than 16.

Example

With power draw 1,200 watts, cord length 100 ft, the answer is 14 gauge (AWG).

How to measure

Find the watts or amps on the label of whatever you’re plugging in. If it lists amps, multiply by 120 to get watts. For several things on one cord, add them up.

Measure the distance you actually need to cover, then buy the shortest cord that reaches. A longer cord drops more voltage, which is why the gauge has to go up as the length does. Remember that a lower gauge number means a thicker wire.

Cord gauge by load and length

Minimum wire gauge (AWG) to keep the voltage drop reasonable. Lower numbers are thicker cords.

Load25 ft50 ft100 ft
500 W (lights, fan)181818
1,000 W (drill, small vacuum)181814
1,500 W (heater, saw)161612
1,800 W (most a 15 A circuit carries)141412

Common mistakes

  • Using a cord while it’s coiled. A tightly wound cord can’t shed heat; unroll it fully.
  • Using indoor cords outdoors. Outdoor cords have tougher jackets rated for moisture and sunlight; look for a “W” in the rating.
  • Plugging cords into cords. Daisy-chaining adds connections that can overheat. Use one cord of the right length and gauge.
  • Running cords under rugs or through doorways where they get pinched. Damage to the insulation is a fire risk.

Tips before you buy

  • When in doubt, go one size heavier. A thicker cord costs a little more and never hurts.
  • Outdoors, use a cord marked for outdoor use (a “W” on the jacket), and keep connections off wet ground.
  • Don’t use extension cords for space heaters. Plug heaters straight into a wall outlet.
  • A cord that feels warm is overloaded. Unplug it and use a heavier gauge or a shorter run.

Common questions

What gauge extension cord do I need for 100 feet?

For a 10 amp tool, 14 gauge. For 13 amps, 12 gauge. For a small load under 5 amps, 16 gauge is fine.

What gauge extension cord for Christmas lights?

LED light displays draw little power. A 16 gauge outdoor cord handles up to 13 amps (about 1,560 watts) at 50 feet.

Is 12 gauge thicker than 14 gauge?

Yes. The smaller the gauge number, the thicker the wire and the more current it can carry over a longer distance.

Add this calculator to your website

Free for any site or blog. Paste this code where you want the calculator to appear. The short script makes it resize to fit; if your site doesn’t allow scripts, the calculator still works without it.