Heat pump size calculator

Enter your home’s heated and cooled area and your climate. You’ll get the capacity in BTU and the nearest heat pump size in tons.

Heat pump size

4 tons

Capacity needed
45,000 BTU per hour
Exact tons
3.75 tons

Shop for this project

As an Amazon Associate, Measure the Dream earns from qualifying purchases.

How it works

Heat pumps are sized in tons, and one ton is 12,000 BTU per hour. A quick estimate multiplies floor area by about 25 BTU per square foot in mild climates, 30 in moderate ones and 35 in cold ones, where the heat pump has to keep up with winter heating rather than just summer cooling. The calculator adjusts for insulation and rounds up to the next half ton, the steps heat pumps are sold in.

Example

With heated and cooled area 1,500 sq ft, climate: moderate (zone 4: mid-Atlantic, Pacific NW), insulation: average, the answer is 4 tons.

How to measure

Use the conditioned floor area of the home, meaning the space the system heats and cools, not the garage or unheated basement. Your property records or a listing usually have the square footage.

This gives a starting estimate. A contractor should do a Manual J load calculation, which accounts for your windows, insulation, air leaks and local design temperatures, before you buy.

Heat pump size by home size and climate

In tons, for average insulation. One ton is 12,000 BTU per hour.

Home sizeMild (zones 1–3)Moderate (zone 4)Cold (zones 5–7)
1,000 sq ft2.52.53
1,500 sq ft3.544.5
2,000 sq ft4.556
2,500 sq ft5.56.57.5
3,000 sq ft6.57.59

Common mistakes

  • Sizing by square footage alone. Two homes the same size can need very different systems. Square footage is a starting point, not a final answer.
  • Oversizing. A heat pump that’s too big runs in short cycles, which wears it out faster and controls humidity poorly.
  • Ignoring cold-weather capacity. Heat pumps lose capacity as it gets colder. In cold climates, check the unit’s output at 5°F, and look at cold-climate models.
  • Keeping undersized ducts. A new heat pump on old ductwork that’s too small can be noisy and inefficient. Have the ducts checked.

Tips before you buy

  • In cold climates, look for a cold-climate heat pump rated to keep its capacity at 5°F or below, or plan on backup heat.
  • Get a Manual J load calculation before buying. Heat pump sizing matters more than with a furnace, because an oversized unit dehumidifies poorly in summer.
  • Ductless mini-splits are sized per room or zone instead. Use the AC BTU or heater size calculator for single rooms.

Common questions

What size heat pump do I need for a 1,500 square foot house?

About 4 tons in a moderate climate with average insulation (45,000 BTU). In a mild climate, about 3.5 tons. In a cold climate, about 4.5 tons.

How many square feet does a 3 ton heat pump cover?

Roughly 1,200 square feet in a moderate climate and up to about 1,450 in a mild one, with average insulation.

How many BTU is a ton?

12,000 BTU per hour. A 3-ton heat pump is 36,000 BTU.

Add this calculator to your website

Free for any site or blog. Paste this code where you want the calculator to appear. The short script makes it resize to fit; if your site doesn’t allow scripts, the calculator still works without it.